Deep groove ball bearings

Contact Now

Our deep groove ball bearings deliver reliable performance in a wide range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality. Our portfolio includes standard, thin section, narrow, wide and miniature and extra-small deep groove ball bearings that span 3 mm to 400 mm bore sizes.

Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. 

Bearing Number Bore Dia Outer DIa Width Size
25 mm x 47 mm x 12 mm skf 6005 N Deep groove ball bearings Not Applicable Set Screw 210 Series Steel
0.6 mm x 2.5 mm x 1 mm skf W 618/0.6 Deep groove ball bearings Steel Steel Grip Tight Steel
7 mm x 19 mm x 6 mm skf 607-Z Deep groove ball bearings 8 6,800,000 N Machined Brass 420 mm
5 mm x 11 mm x 4 mm skf W 628/5-2RS1 Deep groove ball bearings Steel Stainless Steel Steel Non-Expansion
35 mm x 62 mm x 14 mm skf 6007-2Z Deep groove ball bearings 1,000 rpm 120.000 kg 1.70 460 mm
17 mm x 47 mm x 14 mm skf 6303-Z Deep groove ball bearings 150.0000 mm 3600 rpm 2600 rpm 2.00 mm
90 mm x 190 mm x 43 mm skf 6318-RS1 Deep groove ball bearings Setscrew 51.08 LB 307 Series SPLIT
5 mm x 13 mm x 4 mm skf W 619/5-2Z Deep groove ball bearings 104.00 mm 335000 N 307000 N 3600 rpm
2,38 mm x 7,938 mm x 9,119 mm skf D/W R1-5 R-2Z Deep groove ball bearings Tapered 782475319305 4 Bolt Pillow Block 2.4375 in
80 mm x 125 mm x 22 mm skf 6016-2RS1 Deep groove ball bearings 1.00 mm 11000 rpm 8000 rpm Shield & Seal & Snap
400 mm x 600 mm x 90 mm skf 6080 M Deep groove ball bearings Std Retainer Grip Tight Ball Bear 209 Series Normal Duty
6,35 mm x 15,875 mm x 4,978 mm skf D/W R4-2RS1 Deep groove ball bearings 1.84 Open 180 mm Machined Brass
7/17